What is the TYRE pressure for a Ford Focus Zetec?
Olivia Shea
Updated on February 27, 2026
Ford Focus Tyre Pressure
| Tyre Pressure | Front | |
|---|---|---|
| 215/55 R17 94V | 160km/h (100mph) and under | 2.3 bar 33psi 230kPa |
| 2.4 bar 35psi 240kPa | ||
| 160km/h (100mph) and over | 2.3 bar 33psi 230kPa | |
| 2.4 bar 35psi 240kPa |
What should the TYRE pressure be for a Ford Focus?
Earlier Ford Focus used 30-32 PSI, newer Focus use 35 PSI.
What pressure should my tyres be 205 55R16?
205/55R16 91 SL is a Standard Load tire with a load index of 91 and a maximum tire load capacity of 1356 lbs @ 36 psi, capable of supporting up to 1356 pounds or 615 kilograms when inflated to its maximum air pressure of 36 pounds per square inch (psi) or 248 kilopascals (kPa).
What is 2.4 TYRE pressure in psi?
Looking for tyre pressure Data/Charts? If so Click here
| PSI | BAR | BAR |
|---|---|---|
| 13 | 0.9 | 2.2 |
| 14 | 1.0 | 2.3 |
| 15 | 1.0 | 2.3 |
| 16 | 1.1 | 2.4 |
Where is the tyre pressure on a Ford Focus?
The correct tyre pressures for a Ford vehicle can be found in the vehicle Owners Manual, on the inside of the fuel filler flap, or on the plate on the drivers door frame. If you have any concerns about the tyre pressures of your vehicle, please contact your local Ford Dealer, who will be happy to help.
How do I know my tyre psi?
You can find the recommended tyre pressure for your vehicle in your vehicle handbook or printed either in the sill of the driver’s door or on the inside of the fuel tank flap. Your vehicle manufacturer may suggest different tyre pressures for your front and rear tyres so make sure you’re aware of these guidelines.
Should front tyres have higher pressure?
Tyre pressures are normally higher in the front than the rear, to compensate for the extra weight of the engine and transmission, especially on front-wheel-drive cars. If you have a full complement of passengers and luggage, car makers often recommend pumping up the rear tyres to compensate.
What should the tyre pressure be on a Ford Focus?
Ford Focus Tyre Pressure. This tyre placard recommends a minimum tyre pressure of 33psi for the 2019 Ford Trend hatchback. This is equal to 230kPa and 2.3 bar. Note: This advice is only to be used as a guide.
How do I reset the TPMS sensor on a Ford Focus?
Follow these steps to relearn or reset the Tyre Pressure Monitoring System (TPMS) sensor on your Ford Focus: Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake. Adjust the tyre inflation pressure recommended on the tyre placard located on the door panel.
Where can I find the recommended tyre pressure for my vehicle?
You can find the recommended tyre pressure for your vehicle in your vehicle handbook or printed either in the sill of the driver’s door or on the inside of the fuel tank flap. Your vehicle manufacturer may suggest different tyre pressures for your front and rear tyres so make sure you aware of these guidelines.
How do I reset the tyre pressure sensor on my car?
Scroll down to Tyre Monitor and press OK. Now press and hold OK. Keep the OK button pressed down and wait for the message: ‘ Tyre Pressure Stored ‘. f you replaced a wheel, tyre, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset.
